We spent many hours on research to finding metallic silver pc water cooling fluid additive, reading product features, product specifications for this guide. For those of you who wish to the best metallic silver pc water cooling fluid additive, you should not miss this article. metallic silver pc water cooling fluid additive coming in a variety of types but also different price range. The following is the top 10 metallic silver pc water cooling fluid additive by our suggestions
973 reviews analysed
1. Lisle 24680 Spill-Free Funnel
- 45 degree elbow allows use on radiator caps that are placed at an angle
- The E-adapter is used on the surge tanks on many Ford applications
- The spill-free funnel eliminates trapped air pockets which usually cause erratic cooling system and heater performance
- Extension allows access to caps located under shrouds or in fender wells
The spill-free funnel has been improved by adding an extra 45 degree elbow, a 5 inch extension, and a new E-adapter. The E-adapter is used on the surge tanks on many Ford applications. The 45 degree elbow allows the use on radiator caps that are placed at an angle. The extension allows access to caps located under shrouds or in fender wells.
2. Engine Ice TYDS008 High Performance Coolant – 0.5 Gallon
- Engine Ice hi-performance coolant is biodegradable, phosphate free and non-toxic, typically reduces operating race temperatures and effectively keeping boil over temperatures to 256° Fahrenheit or less and freeze-up protection to -26° Fahrenheit
- With an average reduction in operating temperatures of 10° Fahrenheit – 20° Fahrenheit Engine Ice is perfect for racing or street, motorcycle or auto, ATV or snow machine
- Engine Ice hi-performance coolant is legal in CCS and ASRA road racing and permitted at many tracks around the world. Easy to Use – Premixed with deionized water for out-of-the-bottle use.
- Engineered to keep your operating temperatures at optimum performance to not lose power through excess heat
- Engine Ice is safe for aluminum and most all metals
- Uses propylene glycol, which has been proven to eliminate water pump gasket and seal failures
- it has also shown in high load, high stress conditions to reduce operating temperatures more than standard coolants
Engine Ice Hi-Performance Coolant is biodegradable, phosphate free and non-toxic, typically reduces operating race temperatures and effectively keeping boil over temperatures to 256° Fahrenheit or less and freeze-up protection to -26° Fahrenheit. With an average reduction in operating temperatures of 10° Fahrenheit – 20° Fahrenheit Engine Ice is perfect for racing or street, motorcycle or auto, ATV or snow machine. Engine Ice Hi-Performance Coolant is legal in CCS and ASRA road racing and permitted at many tracks around the world. Engineered to keep your operating temperatures at optimum performance to not lose power through excess heat. Engine Ice is safe for aluminum and most all metals. Uses propylene glycol, which has been proven to eliminate water pump gasket and seal failures. It has also shown in high load, high stress conditions to reduce operating temperatures more than standard coolants.
3. PrimoChill Ice – Low-Conductive Coolant (32 oz.) – Clear
- Pre-mixed and ready to go for your convenience.
- Special corrosive inhibiting ingredients to prevent sludge build up and galvanic corrosion**.
- Special broad-spectrum antimicrobial agent, helps keep your cooling loop pristine**.
- Safe on all plastics, rubbers, and miscellaneous gasket materials.
PrimoChill takes pride in providing solutions, and PC Ice is the solution to your water cooling fluid dilemma. This revolutionary cooling formulation takes a giant step in the world of water cooling-leaving the competition in a puddle of their own sweat. PC Ice is intended for the casual user looking to get into water cooling without worrying about their system springing a detrimental leak*. Its clean, low viscosity and low chemical makeup creates an excellent coolant for your PC. If you are looking for an affordable and efficient solution as well as a peace of mind, the ONLY solution is PC Ice. The name hasn’t changed, the performance is still top notch, the cost is still outstanding, leaving PC Ice ounce for ounce STILL your best choice.
- Repeatable chemistry for Identical colors every time.
- Designed for users to fill it and forget it.
- Pre-measured and pre-dyed. Ready to add to your system.
- Cleanest coolant formulation in the water cooling industry.
- Preservative and APE free.
- Special inhibiting ingredients that prevent sludge build up of algae and galvanic corrosion.
- Bottle Size: 32 fluid ounces
- Shelf Life: 2 years (unopened)
- Mix Ratio: Use as Bottled
CompatibilityWe highly recommend visiting the manufacturer’s website for a complete list.
- Additives / Fluids: PC ICE only
- Do not mix ANY additional additives, coolants or silver coils with ICE. This will change the formulation of ICE causing undesirable results.
- Safe to use with all rubber gaskets, acrylic tubing, pvc tubing, petg tubing, glass tubing, as well as nickel and copper components.
- 1x 32oz Bottle PrimoChill ICE
As with all Low-Conductive fluids, PC ICE can become conductive if it comes in contact with excessive dust or other fluids that may be condu…
4. Rislone 4405 Engine Oil Supplement Concentrate with Zinc Treatment – 11 oz.
Rislone Engine Oil Supplement.
5. PrimoChill System Reboot – Cooling Loop Treatment
Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage. Similar to Sysprep this flush style solution will cleanse out any debris/residue leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. The beauty of ReBoot is it’s ability to pull color from stained components.
Compatibility: ReBoot is compatible with rigid and flexible tubing of all sizes. It is safe to use on rubber, plastics and acrylics
Included Parts: 1x 15ml Bottle of ReBoot (makes 1 gallon of coolant)
1.Double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of ReBoot into 1 US Gallon of fresh DI or Distilled water, shake for 30 seconds
3.Fill loop with treated solution and be sure to remove as many air bubbles as possible.
4.Start pump and begin circulating the treated solution.
5.Run solution for at least 24 to 48 hours to ensure loop is properly flushed and treated. ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
6.Drain System. Inspect drained solution for debris or foreign particles. Repeat flush if needed.
7.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
9.Fill loop with your choice of coolant and begin water-cooling.
** Reboot needs to be flushed from the system until no foam is seen and water runs clear
6. Arctic Silver 5 Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver – 2 Pack with Bonus Tool
- Arctic Silver 5 contains over 88% thermally conductive filler by weight. In addition to micronized silver, Arctic Silver 5 also contains sub-micron zinc oxide, aluminum oxide and boron nitride particles.
- Its unique high-density filling of micronized silver and enhanced thermally conductive ceramic particles, Arctic Silver 5 provides a new level of performance and stability
- Bonus Tool will come in handy rather then getting your hands dirty
- Coverage Area: A 3.5g gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003″ thick, the 3.5g gram syringe will cover approximately 16 square inches.
- 3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core
7. Liqui Moly 2009 Anti-Friction Oil Treatment – 300 ml
Anti-friction (300 ml. Can) forms high load-bearing film of lubricant on all friction surfaces. Recently made by Liqui Moly, not been lying around. You will be surprised at how much better your engine sounds and how controlled it will be even at very high RPM.
8. ISO-HEET 28202 Premium Fuel-line Antifreeze Water Remover and Injector Cleaner, 12 Fl oz.
‘Antifreeze/Water Remover, Fuel Line, Premium, Container Size 12 oz., Boiling Point (F) 180, Freezing Point (F) -, VOC Content -, Dissolves Water, Ice, For Use With Gasoline, Diesel and 2-Cycle Engines, Application Cleans Fuel Injectors and Carburetors, Includes -, Standards -‘
9. Lumax LX-1316 Black Heavy Duty Lever-Action Barrel Pump
- Heavy Duty, Lever-Action Barrel Pump
- Designed for fast transfer of Non-Corrosive Fluids, such as, Heating Oil, Motor Oil, Transmission Fluid, Automotive Additives (Oil Based), Oils (Light and Heavy), Soaps, etc.
- Fits 15-55 Gallon (57-210 L) Drums with Standard 2″ (50 mm) Bung Opening
- Unique Toggle Mechanism Design uses Compound Leverage for Pumping with little effort – Delivers Fast transfer of Fluids
- Longer Lever Handle assures firm Grip and increased Leverage – Develops more pressure with less effort
10. CRC 03055 Food Grade Chain Lubricating Spray, 12 oz Aerosol,Clear/White
CRC food grade chain lube is a special blend of synthetic lubricants and mineral oil, designed to keep roller drive and conveyor chains lubricated. It is specifically designed to provide the convenience of aerosol application where incidental food contact may occur. The unique formula will penetrate, lubricate and protect moving parts by reducing friction and wear that causes metal fatigue. Regular use of food grade chain lube will help inhibit corrosion, reduce load stress and greatly extend chain life. Recommended for use as a lubricant and corrosion inhibitor on conveyor chains, packaging equipment, hoist chains, link and roller assemblies, forklift trucks and many other industrial applications. NSF H1 rated. High temperature stability. Operates effectively in temperatures up to 325 degrees F. Offers effective performance while complying with the EPA regulations on the use of ozone depleting chemicals. Material safety data label. Provides instant access to current safety information should an accident or OSHA inspection occur. Helps comply with OSHA hazard communications standard 29 CFR 1910.1200.
By our suggestions above, we hope that you can found Metallic Silver Pc Water Cooling Fluid Additive for you.Please don’t forget to share your experience by comment in this post. Thank you!