Finding your suitable readers for thermostat 115 volt cooling is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for thermostat 115 volt cooling including detail information and customer reviews. Let’s find out which is your favorite one.
596 reviews analysed
1. Nashone Wireless Temperature Controller,Electric Thermostat with Remote Control Built in Temp Sensor 3 Prong Plug LCD Display Heating Cooling Mode(wirelss thermostat)
- REMOTE CONTROL.ON and OFF just need to click button. Control distance reach 40 meters with the sensor in open area and certified by FCC
- SMART TEMPERATURE MEASUREMENT. Built-in temperature sensor, ambient temperature detected automatically by remote controller, appliance stop to heat or cool after current temperature equal target temperature
- MULTIPLE SAFETY PROTECTION.3-Prong socket with grounded terminal, recoverable overload short circuit and Max load current up to 15A.Supply security alarms in unattended operation
- EASY TO READ AND INSTALL. Accurate reading for LCD display with back light. Wall mounted or table stand, user-friendly installation
- WHAT YOU WILL GET.Wireless thermostat outlet, remote control, user manual, 18 month warranty for quality-related issues and 45 days money back guarantee
2. Line Voltage Mechanical Thermostat, Heating/Cooling, 120 to 277VAC
3. Dayton 6EDY5 Line Voltage Thermostat, 120-240V, SPDT
4. Line Voltage Mechanical Thermostat, Heating/Cooling, 120 to 277VAC
5. HoneyWell T498B1512 Electric Line Voltage Thermostat
6. Programmable Thermostat Outlet Plug for Space Heaters and A/Cs, 120v/ 110v 15 amps, Heavy Duty
- Heavy duty thermostat made for all 15 amp heaters, window units and portable A/Cs.
- With Weekday/ Weekend programming, four slots per day. Comes pre-programmed for plug and play option.
- Quality construction, FCC certification and ultra-clear instructions.
- Will retain programming in event of being unplugged or power loss! (You will have to set the clock again)
- You can set the span of temperature change from 1- 5 degrees!
Welcome To Thermaplug, Where You Program Your Comfort!
This most versatile device can be programmed to make your heater or AC turn on and off until a desired temperature is reached.You can set it to multiple temperatures for different time slots to optimize your comfort. It has a Weekday/ Weekend program, Permanent hold, Temporary hold and a Greenhouse mode. Aside from heaters and ACs it has many applications, such as greenhouses, doghouses, swamp coolers and anything else that is temperature controlled. It is designed that except for the the Date and Time, all settings are retained in the event that the device should get unplugged. Made to work only with models that automatically turn back on once power is restored.
7. Honeywell Manual 4 Wire Premium Baseboard/Line Volt Thermostat(YCT410B1000/U)
Non-programmable electric baseboard thermostat
8. Hycency Programmable Thermostat Outlet, Heating & Cooling Plug in Thermostat (White)
- Programmable Thermostat outlet: The thermostat outlet comes with heating and cooling mode. It is programmed by the remote control and the temperature control range is 32-158℉(0-70℃). Control distance reaches 66ft in the open area. Choice of ℉ or ℃ temperature display on LCD.
- Energy Saving: This hycency thermostat outlet saves energy by reducing wasted energy in your home. it can help save energy costs on heating or cooling and make your home not only Comfortable but energy efficient.
- No need installation: Plug and play, no installation or wiring, easy to use. plug your portable heating or cooling unit into the thermostat outlet, and you’re ready to go.
- Easy Operation: Remote control and thermostat outlet automatically match, then select heating or cooling mode and set the target temperature. thermostat will play with your home device. Built-in temperature sensor for accurate reading temperature.
- APPLICATION: The thermostat plug allows control any 120 volt device up to 15 amps. It can help you control the room temperature accurately. Suitable for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater,etc.
This Hycency programmable thermostat outlet is designed for
automatic control of electric heating unit or cooling unit. It consists of
2 parts: a thermostat outlet and a remote control. Backlight LCD
screen on the remote control for accurate data reading.
Temperature sensor is built in the remote control. it could
automatically detects the ambient temperature and send a signal to
the thermostat socket every 20-30 seconds. The thermostat socket
stops heating or cooling when the current temperature is equal to the
target temperature, provides comfort and energy saving.
1. Plug and play type, no need installation
2. Heating Mode and Cooling Mode switchable
3. LCD with green backlight
4. Display current temperature and target temperature
5. °C/°F switchable
6. Easy setting with memory function
7. High/Low temperature warning:
Low temperature: ≤0°C, current temperature shows LL
High temperature: ≥70°C, current temperature shows HH
8. Low battery warning: The symbol of battery is flashing when the battery voltage is lower than 2.7V
9. RF 433Mhz RF technology
10. Portable design, hold in hand/stand on table/wall mounted
Plug Type: USA Plug
Max Rating: 120V/15A/60Hz, 1800W Max
Transmission Frequency: 433.92MHz
Max. Range: 66ft in Open Area
Current Temp. Range: 0°C~70°C or 32°F~158°F
Target Temp. Range: 0°C~70°C or 32°F~158°F
Temperature Resolution: ±1°C/±1°F
Remote Control Power: 2 * AAA 1.5V Batteries (Battery is not included)
There are 2 ways to reset your mode:
1. Reinstall the battery
2. Long press the ON or OFF, and then long press ON and OFF at the same time.
1 X Thermostat Outlet
1 X Remote Control (Battery is not included)
1 X User Manual
9. DIGITEN Wireless Temperature Controller, Thermostat Outlet Remote Control Thermometer with 2m/6ft NTC Temp Sensor Probe 3 Prong Plug Heating Cooling Mode for Fan Heater Greenhouse
- 【Wireless Remotely Control】: Remotely set parameters and view temperature, no need to operate on the receiver, remote control distance can reach 50-100m (empty ground). It can save all settings even if the power failure.
- 【Easy to use and program】: Only 2-step settings for your application, just plug-in and select heating/cooling system, then this temperature controller auto match and play with your home device. Widely used for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater, garage, greenhouse, etc.
- 【Heating & Cooling Mode】: Automatically turn on/off heating devices or cooling devices through your preset target temperature. Free to switch between ℃/℉. Maintains stable room temperature and provides comfort and energy saving.
- 【ON/OFF manual button on the receiver】: Manually turn on/off the receiver remotely. LCD with backlight display reading accurately. Portable design, handheld/wall mounted.
- 【High Accuracy】: Receiver with 2m/6ft NTC highly accurate temperature probe, ambient temperature is detected automatically by thermostat outlet, when current temperature reach to target temperature, the thermostat socket stop to heat or cool. High and low temperature alarms are available, the maximum load can reach 14A, 1500W
10. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
1x ITC-308 Temperature Controller
By our suggestions above, we hope that you can found Thermostat 115 Volt Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!